freight car panel making machine roll forming machine
Basic Info
Model No.: ZT-009-10
Product Description
Freight car panel making machine roll forming machine
Technical parameters of roll forming machine:
1. Technique parameters of the processing line
Main parameters of KXD-900 roll forming machine | ||
1 | Suitable to process | Color steel plate, galvanized sheet, aluminum coils and etc. |
2 | Width of the feeding material | 1000mm |
3 | Sheet width | 900mm |
3 | Roller station | 14 rows |
4 | Thickness of feeding material | 1.0-2.0mm |
5 | Productivity | 8-12m/min |
6 | Rollers' material | 45# steel |
7 | Diameter of shaft | 90mm |
8 | Weight | About8.5 T |
9 | Length | 10m×2.1m×1.5m |
10 | Voltage | 380V 50HZ 3 phases |
11 | Wall thickness of main forming machine | 14mm steel plate |
12 | Main forming machine body | 400 mm H steel |
13 | Motor power | 18.5 kw |
2. Processing technique and deployment
Processes: Manual decoiler - Roll forming machine - PLC system - Hydraulic system -Post cut - Run out Table
Equipment and Qty. | |
Decoiler | 1 set |
Main roll forming machine | 1 set |
PLC control station | 1 set |
Hydraulic station | 1 set |
Post cut | 1 set |
Electric motor | 1 set |
Output table | 1 set |
The car panel lorry panel roll forming machine can produce the car panel which is used for the lorry lody materials.The feautures of this car panel roll forming machine is that: The machine is easily operating, the car panel profile with the near angle, so that the car panel is much more stable than the one wih the round angle.
Product Categories : Roofing Sheet Roll Forming Machine > Roof and Wall Panel Roll Forming Machine