Steel Roof Tile Roll Forming Machine
Basic Info
Model No.: ZT-004-086
Product Description
Steel Roof Tile Roll Forming Machine and Corrugated Metal Sheet Making Machine
Brief Introduction:
Steel Roof Tile Roll Forming Machine and Corrugated Metal Sheet Making Machine is also called Steel Roof Tile Roll Forming Machine or Corrugated Metal Sheet Making Machine.It is a kind of machine which have two production lines for the roof sheet, the upper layer is one line, and the under layer is another line.But the two layers of Roofing Sheet Tile Roll Forming Machine or two lines can not product at the same time. Compared with two sets single layer machine, it can save space,money,just with one electric control desk and one hydraulic station, so it is easy to do the maintenance for workers.
Photo of Steel Roof Tile Roll Forming Machine and Corrugated Metal Sheet Making Machine for your reference:
Usage of the roof sheet
The roof sheet made by Steel Roof Tile Roll Forming Machine and Corrugated Metal Sheet Making Machine can be widely used in Industrial and civil buildings, warehouse, special construction, large span Steel Structure House as the roof, walls or interior and exterior decoration. Its thickness is from 0.3 mm to 0.8 mm,width can be 914 mm,1000 mm,1200 mm,1220 mm,1250 mm. This is the common and standard sizes. You can also give your requests about the sizes , we can make and design the machine as per your special requests on sizes.
Component of Steel Roof Tile Roll Forming Machine and Corrugated Metal Sheet Making Machine
No. Name Unit Qty 1 Manual decoiler set 1 2 Main forming machine set 1 3 Electric control system set 1 4 Hydraulic pump station set 1 5 Post cut set 1 6 Electric motor set 1 7 Product receiving table set 1
Features:
1. Lower noise, easy to operate
2. Design as customers` request
3. Controlled by PLC
4. Can also provide materials
Working flow:
Main parameter of Steel Roof Tile Roll Forming Machine and Corrugated Metal Sheet Making Machine for your reference(trapezoidal + trapezoidal)
No. | Main parameter | |
1 | Length of the main part | About 8500 х 1650 х 1500 mm |
2 | Weight of main part | About 6.5 t |
3 | Voltage | 380 V/50 HZ 3 Phase (as customer`s request) |
4 | Roller fixer | Middle plate welded |
5 | Frame | 350 H steel welded |
6 | Frame thickness | 20 mm |
7 | Drive mode | Chain |
8 | Material of rollers | 45# steel, surface hard chromium plating. |
9 | Material of shafts | 45# steel |
10 | Diameter of shafts | Φ 80 mm |
11 | Number of rollers | Up layer: 13 rollers Down layer: 15 rollers |
14 | Main power | 5.5 kw |
Other pictures about Steel Roof Tile Roll Forming Machine and Corrugated Metal Sheet Making Machine
Product Categories : Double Layer Roll Forming Machine